Step-by-Step Guide: How to Change WiFi on Ring App for Optimal Home Security

...

Want to change the wifi on your Ring app? Follow these simple steps to connect your Ring device to a new wifi network and stay connected.


Are you experiencing poor connectivity with your Ring app? Or have you changed your internet service provider and need to change the wifi on your Ring app? Whatever the reason, changing your wifi on the Ring app can be a little tricky, but it's not impossible. In this article, we will guide you through the simple steps to change your wifi on the Ring app so that you can continue to enjoy the benefits of remote access and monitoring of your home security system.

The first step to changing your wifi on the Ring app is to ensure that your Ring device is connected to the same wifi network as your smartphone or tablet. This is important because the Ring app needs to communicate with your device over the same network. If your Ring device is not connected to the same network, you won't be able to access it from the app.

Once you have confirmed that your Ring device is connected to the same wifi network as your smartphone or tablet, the next step is to open the Ring app and navigate to the device settings menu. Here, you will find an option to change the wifi network that your Ring device is connected to. Click on this option to proceed to the next step.

Before you can change the wifi network on your Ring device, you will need to put it into setup mode. To do this, press and hold the setup button on your Ring device for at least 15 seconds. The setup button is usually located on the back of the device and is labeled with the word setup. Once you have held down the setup button for 15 seconds, the light on your Ring device will start flashing, indicating that it is in setup mode.

Now that your Ring device is in setup mode, you can proceed to change the wifi network. To do this, follow the on-screen instructions in the Ring app. You will be prompted to select the wifi network that you want your Ring device to connect to. Choose the network that you want to use and enter the password if required. The Ring app will then attempt to connect your device to the new network.

It's important to note that the connection process can take a few minutes, so be patient. If the Ring app is unable to connect your device to the new network, it may be because the wifi signal is too weak. In this case, try moving your Ring device closer to your wifi router or using a wifi extender to boost the signal.

Once your Ring device is successfully connected to the new wifi network, you can exit setup mode by pressing the setup button again. The light on your Ring device will stop flashing, indicating that it is now connected to the new network. You can then return to the Ring app and start using your device again.

In conclusion, changing your wifi on the Ring app is a simple process that can be done in just a few steps. By following the steps outlined above, you can ensure that your Ring device is always connected to the strongest wifi network available, providing you with reliable access to your home security system. So, if you're experiencing connectivity issues or have recently changed your internet service provider, don't hesitate to change your wifi on the Ring app today!


Introduction

Ring app is a smart home security system that allows you to monitor your home from anywhere via your smartphone. One of the essential features of Ring app is its ability to connect to Wi-Fi for seamless operation. However, there may be instances where you need to change your Wi-Fi network for various reasons. In this article, we will guide you on how to change Wi-Fi on Ring app.

Understanding the process

Before we start, it's essential to understand that changing Wi-Fi on Ring app requires two steps: First, you need to update your Wi-Fi network settings on Ring app. Then, you need to reconnect your Ring device to the new Wi-Fi network.

Step 1: Updating Wi-Fi Network Settings on Ring App

Follow these steps to change Wi-Fi network settings on Ring app:

  1. Open Ring app on your smartphone.
  2. Tap on the three-lined menu icon in the top left corner of the screen.
  3. Select 'Devices' from the drop-down menu.
  4. Choose the Ring device you want to update Wi-Fi settings for.
  5. Select 'Device Health' from the list of options.
  6. Tap on 'Change Wi-Fi Network.'
  7. Enter your new Wi-Fi network details and select 'Continue.'
  8. Follow the on-screen instructions to complete the process.

Step 2: Reconnecting Ring Device to New Wi-Fi Network

After updating Wi-Fi network settings on Ring app, you need to reconnect your Ring device to the new Wi-Fi network. Follow these steps to do so:

  1. Press and hold the setup button on your Ring device until the light on the front flashes.
  2. Release the setup button.
  3. Open Ring app on your smartphone.
  4. Select the Ring device you want to connect to the new Wi-Fi network.
  5. Select 'Set Up Device.'
  6. Follow the on-screen instructions to connect your Ring device to the new Wi-Fi network.

Troubleshooting Tips

If you face any issues while changing Wi-Fi on Ring app, try these troubleshooting tips:

Check Wi-Fi Network Settings

Ensure that you enter the correct Wi-Fi network name and password while updating Wi-Fi network settings on Ring app.

Reset Ring Device

If your Ring device is not connecting to the new Wi-Fi network, try resetting it. Press and hold the setup button for 20 seconds until the light on the front flashes rapidly. Then, release the setup button and follow the on-screen instructions to reconnect your Ring device to the Wi-Fi network.

Restart Smartphone

If you are unable to update Wi-Fi network settings on Ring app, try restarting your smartphone and try again.

Contact Support

If none of the above troubleshooting tips work, contact Ring support for assistance.

Conclusion

Changing Wi-Fi on Ring app is a simple process that requires updating Wi-Fi network settings on Ring app and reconnecting your Ring device to the new Wi-Fi network. Follow the steps mentioned above to change Wi-Fi on Ring app. If you face any issues, try the troubleshooting tips mentioned above or contact Ring support for assistance.


How to Change WiFi on Ring App

Ring devices are a great way to keep your home safe and secure. They allow you to monitor activity around your property, receive alerts when someone is at your door, and even communicate with visitors remotely. However, in order for these devices to work properly, they need a stable and reliable WiFi connection. If you're experiencing connectivity issues with your Ring device or have recently changed your home's WiFi network, you may need to update the WiFi settings on your Ring app. In this article, we'll show you how to change WiFi on Ring app in just a few easy steps.

Step 1: Opening the Ring App on Your Mobile Device

The first step to changing your Ring device's WiFi settings is to open the Ring app on your mobile device. The Ring app is available for free on both iOS and Android devices, and can be downloaded from the App Store or Google Play Store, respectively. Once you've downloaded and installed the app, open it up and log in to your Ring account.

Step 2: Navigating to the Device Settings Menu

Once you're logged in to the Ring app, you'll need to navigate to the device settings menu. This can be done by tapping on the three lines in the upper left corner of the app, then selecting Devices from the menu that appears. From there, select the Ring device that you want to update the WiFi settings for.

Step 3: Selecting the WiFi Network Option

After selecting the Ring device that you want to update, you'll be taken to its settings page. Here, you should see an option for WiFi Network. Tap on this option to begin the process of updating your Ring device's WiFi settings.

Step 4: Scanning for Available WiFi Networks

The Ring app will now scan for available WiFi networks in your area. This process may take a few moments, so be patient. Once the app has finished scanning, it will display a list of available WiFi networks on your screen.

Step 5: Selecting the New WiFi Network of Your Choice

Next, you'll need to select the new WiFi network that you want to connect your Ring device to. This can be done by scrolling through the list of available networks and tapping on the one that you want to use.

Step 6: Entering the Password for the New WiFi Network

Once you've selected the new WiFi network, you'll need to enter its password. This is the same password that you would use to connect any other device to your home's WiFi network. Make sure that you enter the password correctly, as an incorrect password will prevent your Ring device from connecting to the network.

Step 7: Saving the Changes to the Device Settings

After entering the password for the new WiFi network, tap on the Save button to save the changes to your Ring device's settings. The app will now attempt to connect your Ring device to the new WiFi network.

Step 8: Testing the New WiFi Connection

Once the app has finished attempting to connect your Ring device to the new WiFi network, it's a good idea to test the connection to make sure that everything is working properly. You can do this by opening up the Ring app and checking to see if you're able to access your Ring device's live view or receive alerts. If everything is working as it should, then congratulations! You've successfully updated your Ring device's WiFi settings.

Step 9: Troubleshooting Any Connection Issues

If you're experiencing any issues with your Ring device's new WiFi connection, there are a few things that you can try to troubleshoot the problem. First, make sure that you entered the correct password for your new WiFi network. If you're still having trouble, try resetting your Ring device and starting the setup process again. You may also want to check your home's WiFi network to make sure that it's working properly.

Step 10: Enjoying Uninterrupted Access to Your Ring Device

Once you've successfully updated your Ring device's WiFi settings, you can enjoy uninterrupted access to your device. With a stable and reliable WiFi connection, you'll be able to keep your home safe and secure, monitor activity around your property, and communicate with visitors remotely. Just remember to keep your Ring app up to date and check your device's WiFi settings periodically to ensure that everything is working properly. In conclusion, changing your WiFi on Ring app is a simple process that can be done in just a few easy steps. By following the steps outlined in this article, you can update your Ring device's WiFi settings and enjoy uninterrupted access to your device. Remember to troubleshoot any connection issues that you may experience, and always keep your Ring app up to date. Happy monitoring!

How to Change WiFi on Ring App: Pros and Cons

Changing WiFi on Ring App: A Point of View

As technology advances, more and more devices are being connected to the internet. The Ring app is one such device that allows you to monitor your home through your smartphone. However, changing the WiFi on Ring app can be a daunting task for some. Here's a point of view on how to change WiFi on Ring app and its pros and cons.

How to Change WiFi on Ring App

Changing the WiFi on Ring app is a fairly simple process. Here are the steps:
  1. Open the Ring app on your smartphone and navigate to the device settings.
  2. Select the device whose WiFi you want to change.
  3. Scroll down and click on Change Wi-Fi Network.
  4. Follow the instructions to connect your device to the new WiFi network.
  5. Once the device is connected, test it to ensure it is working properly.

Pros of Changing WiFi on Ring App

  • Better connectivity: If you're experiencing poor WiFi connectivity, changing the WiFi on Ring app can provide better connectivity and a stronger signal.
  • Easier setup: If you're setting up a new WiFi network, you can easily connect your Ring device to it by changing the WiFi on the Ring app.
  • Greater control: Changing the WiFi on Ring app gives you greater control over which network your devices are connected to.

Cons of Changing WiFi on Ring App

  • Data loss: Changing the WiFi on Ring app may result in lost data or settings on your device.
  • Time-consuming: Changing the WiFi on Ring app can be a time-consuming process, especially if you have multiple devices connected to it.
  • Technical difficulties: Some users may encounter technical difficulties when trying to change the WiFi on Ring app.

Table Comparison

ProsCons
Better connectivityData loss
Easier setupTime-consuming
Greater controlTechnical difficulties
In conclusion, changing WiFi on Ring app has both its pros and cons. While it provides better connectivity and greater control over your devices, it can also result in lost data or technical difficulties. It is important to weigh the pros and cons before deciding to change the WiFi on Ring app.

Changing Your WiFi on the Ring App: A Step-by-Step Guide

Welcome to our blog post on how to change the WiFi on your Ring app. We understand that changing your WiFi can be a daunting task, but with this step-by-step guide, we aim to make it as easy as possible for you.

Before we begin, it’s important to note that changing your WiFi means that you will have to reconnect all devices that use WiFi in your home. This includes your Ring device, so be sure to have your Ring app open and ready before continuing with the steps below.

Step 1: Open Your Ring App

The first step in changing your WiFi on the Ring app is to open the app on your mobile device. The Ring app can be downloaded from both the Apple App Store and Google Play Store for free.

Step 2: Select Your Device

Once you have opened the Ring app, select the device that you wish to connect to your new WiFi. This can be done by tapping on the device that appears on your dashboard.

Step 3: Tap on Device Settings

Next, tap on the “Device Settings” button that appears at the bottom of your screen. This will take you to a new page where you can access the settings for your device.

Step 4: Tap on WiFi Settings

On the Device Settings page, scroll down until you see the “WiFi Settings” option. Tap on this option to proceed to the next step.

Step 5: Select “Change WiFi Network”

Once you have accessed the WiFi Settings page, select the “Change WiFi Network” option. This will prompt you to enter the new WiFi network name and password.

Step 6: Enter Your New WiFi Network Name

Now that you have selected “Change WiFi Network,” you will be prompted to enter the name of your new WiFi network. Be sure to enter the correct network name to ensure a successful connection.

Step 7: Enter Your New WiFi Password

After entering your new WiFi network name, you will be prompted to enter the new WiFi password. Double-check that you have entered the correct password before proceeding.

Step 8: Wait for Your Device to Reconnect

Once you have entered the new WiFi network name and password, your device will begin to reconnect to the new network. This may take a few minutes, so be patient and wait for the process to complete.

Step 9: Check Your Device’s Connection Status

After your device has finished reconnecting to the new WiFi network, check the device’s connection status to ensure that it is connected successfully. You can do this by going back to the Device Settings page and checking the WiFi status.

Step 10: Enjoy Your Newly Connected Ring Device

Finally, enjoy your newly connected Ring device! With your device now connected to your new WiFi network, you can continue to use it with ease and peace of mind.

We hope that this step-by-step guide has been helpful in changing your WiFi on the Ring app. If you have any further questions or concerns, please do not hesitate to contact Ring support for assistance.

Thank you for reading, and we wish you all the best with your newly connected Ring device!


People Also Ask About How to Change WiFi on Ring App

Why do I need to change my WiFi network on Ring app?

If you have recently changed your WiFi network or router, you will need to update the WiFi settings on your Ring app. Otherwise, your Ring device will not be able to connect to the internet and function properly.

How do I change the WiFi network on my Ring app?

To change the WiFi network on your Ring app, follow these steps:

  1. Open the Ring app on your mobile device and select the device you want to update.
  2. Tap on the gear icon in the top right corner to access the device settings.
  3. Select Device Health and then tap on Change Wi-Fi Network.
  4. Enter the new WiFi network name and password and follow the prompts to complete the setup process.

What if I don't remember my new WiFi network name or password?

If you don't remember your new WiFi network name or password, you can usually find it on the back of your router or by logging into your router's settings page. If you are still unable to find it, contact your internet service provider for assistance.

Can I change the WiFi network on my Ring app remotely?

No, you must be within range of your Ring device and the new WiFi network to update the settings. If you are unable to access the new WiFi network, you will need to update the settings once you are able to connect.

Will changing the WiFi network on my Ring app affect my device's recordings?

No, changing the WiFi network on your Ring app will not affect your device's recordings or settings. However, you may need to adjust the motion and notification settings if the new WiFi network has a different range or coverage area.